Are your games not performing as well as they do for others? Can you see astonishing screenshots and think, “I wish my computer could do that?” Frequently, getting those kind of results starts using the video card. Updating your video card could be a daunting task, especially with all these alternatives out there, but with a budget in mind along with a screwdriver in hand, you’ll have a beefy new card before you understand it installed. Start from Step 1 below to understand how.

Picking a Video Card

1 Open your case. Install the new one, identify your power supply, and so that you can locate your old card, you will need to open your computer’s case. Most modern cases have thumbscrews on the rear that permit you to readily remove the side panels, but you may need a Phillips-head screwdriver to be able to take off the screws on cases that are older.

You must disconnect the power cable and all peripherals before removing the side panels.

Take away on the other side of the motherboard. Should you look on the rear of your computer you’ll see a panel on one side which contains various interfaces, including USB, Ethernet, display ports and much more. This can help you see on the motherboard is located which side, and is the motherboard I/O panel. It is possible to set your pc with this side and eliminate the contrary panel so that one can quickly reach the motherboard.

Open your case

2 Make sure your power supply is up to the job. Powerful video cards require a power supply that may give them the juice they need. In case you are running a classic power supply, or you might have lots of other components drawing power, your power supply mightn’t make the cut. If this is the case, consider upgrading your power supply in the exact same time which you update your video card.

powre off supply

  • There are many different websites online which you’re likely to install or that allow you to compute electricity requirements by assessing each of the hardware now installed. Search for “power supply calculator” using your favorite search engine.
  • Your power supply will also need PCI-E connectors. This generally is not an issue if your power supply is not older, but electricity supplies mature than 10 years may not have the proper connectors.
  • The maximum wattage of your power supply must be printed on a decal affixed to the power supply. You might need to get rid of the power supply to locate it.
3 Ensure that the motherboard supports the card.

Almost all video cards are PCI-E these days, and so you will need to ensure you have at least one of the slots. They are typically located closest to the chip in the row of PCI slots. Should you don’t have any PCI-E slots, you may need to install a new motherboard.

PCI connecter

if you wish to upgrade your video card. Refer to the documentation to seek out the layout diagram of your motherboard. This will help you identify where the PCI-E slots are located. Installing a new motherboard will require that you reinstall your operating system.

Most notebooks don't allow one to update the video card.
4 Be certain the card will fit. A lot of modern video cards are rather sizeable, and several will take the space of two PCI slots in the computer. They can not be fairly short and long, which means you’ll need to make sure that there is enough vertical and horizontal clearance.

Be certain the card will fit

Utilize a tape measure to notice both the vertical and horizontal clearance which you have available. Almost all cards are going to have their measurements listed within their product descriptions, enabling you to ensure that it’ll fit before you buy it.

5 Reach a balance between cost and power. Video cards may get expensive. Obscenely expensive. In a specific stage, the common user will not be getting any gains from the increased price of higher-end cards. Examine the programs locate a card and you want to utilize your card with. That gives the best power and reliability for the dollar to you.

  • The higher priced cards are typically geared towards users and video card overclockers who wish to make use of double- or quad-card settings.
  • Be sure to read as many reviews as you can before deciding on a card. There are plenty of resources on-line for finding the very best performance for your financial plan. Sites such as Tom’s Hardware will release comparison graphs ranking the present most popular cards in all price ranges, and client reviews on sites like Newegg can provide insight into the typical man’s encounter with the card.
  • Check the system requirements for the favorite games. See what video card is recommended bear in mind the requirements of future games, and also to receive the best performance from the games you love.
6 Locate cards which are recommended for your own interests. Distinct cards are ideal for different applications, though most cards excel at being jack-of-all-trades. Here are a few of the popular cards by 2015:

  • AMD Radeon R9 290X – This is a great all-around card that will run most games at Ultra settings without breaking a sweat. It is possible to normally find these for around $300. The similarly performing Nvidia GeForce GTX 970 can be had for $50 more, though it has lower electricity use.
  • AMD Radeon R7 260X – That is a low end card that could handle most games at Medium to High settings. This card can be snagged by you . The likewise performing Nvidia GeForce GTX 750 Ti can be had for $30 more, though it’s lower power utilization, and does not need a PCIe power connector (advised for PCs with lower-end PSUs).
  • Nvidia GTX 980 – This is one of the finest high end cards in the instant that can handle pretty much anything you throw at it p. It has a price to match too – about $550 for the EVGA ACX 2.0 and $680 for the Classified variant.
    Search for cards for example 3 or 4 GB in case you are focused on graphic design. These will be more expensive, but will improve encoding speeds and your rendering.
7 Have a look at the display capabilities of the card. As display technology improves, so do the variety of possibilities on video cards. Your new card may support any mixture of those, or HDMI, DVI, DisplayPort, VGA. Check what buy, and your screen uses to connect your card accordingly.

From left-top to right top: DisplayPort, DVI, VGA and HDMI

From left-top to right top: DisplayPort, DVI, VGA and HDMI

To find the best possible quality, you’ll want to link via HDMI or DisplayPort.
Ensure the video card can support multiple screens with quality ports in case you would like top run multiple screens. You do not need one computer screen on the other on VGA, because the VGA screen will be low resolution and HDMI and seem awful next to the HDMI one.

Installing the Card

1 Uninstall your old drivers.

One of the greatest potentials for difficulties and errors stems from driver incompatibility. Before installing your brand-new card, it is recommended that you uninstall the drivers that Windows is currently using to display images.
The fastest method to uninstall your drivers would be to open the Device Manager and uninstall from there. To open the Device Manager, search for it or press Win + X and select it in the menu (Windows 8 only).

Display Adapters section uninstal drivers for video card

After in the Device Manager, expand the Display Adapters section. Right click on your own present display adapter and click Uninstall. Follow the prompts to remove the driver from your computer. Your screen will likely revert to low quality, with big icons and blurry text. Power down your computer after uninstalling the drivers.

2 Ground yourself.

Working with computer components that are sensitive, you should always ensure that you are correctly grounded. Electrostatic discharge can damage or ruin your components, leaving them useless. Rather you will end up using an anti-static wrist strap attached to open metal in your case. If you do not have one, you can ground yourself by touching a metal water tap.

Be sure that the open computer isn't resting on carpeting, when working inside the computer and that you will be standing on tile or linoleum. Be sure that the computer is unplugged from the wall before starting focusing on the insides.
3 Identify the old card.

It’s possible for you to find your old graphics card fit in the PCI-E or AGP slot in your motherboard (AGP cards are generally located on older computers). Most video cards are fairly big, and will be the largest card installed in your system. They frequently have heatsinks and fans attached to them.
If your computer was using integrated images before (your monitor was plugged in right to the motherboard), then there will probably not be any card to remove.

4 Remove your existing card.

If you are updating video cards, before installing the newest one you will desire to get rid of the old card. Unscrew the screw that is plugging in the card. Most newer cards possess a tab beneath close to the back of the PCI slot that may have to be released as a way to pull the card out.

Remove existing video card

When removing the card, pull it straight up so that you do not damage the PCI slot. Make sure to disconnect any exhibited plugged to the old card before removing it.

5 Clean out any dust. Together with the old card out, this will be an excellent time to clean out a number of the dust that is accumulated. Use compressed air to clear the dust from the crevices round the PCI slot. Dust can develop and cause your components to overheat, so staying on top of cleaning will aid your pc run to get a long time.

6 Fit the brand new card.

Gently remove from its antistatic bag, avoiding touching the contacts or circuitry. Add it straight into the empty PCI-e slot until it is completely seated and apply even pressure to the top. When you own a clip for the PCI-E slot, you’ll hear it click into place.

Make certain before fully seating the card no cables or some other components are in the manner.

You may need to remove the nearby panel if your video card is two panels wide.

7 Secure the card. Use case screws to fix the video card. If the video card is two panels broad, you’ll desire to fasten it with two screws, one per bay. Make sure before fastening the screws, the card is added completely.

8 Join the power supply.

Most modern cards will have power supply connector ports built in to the very best of back of the card. You will need to connect two or one PCI-E connectors from your power supply, which are usually 6-pin cables. These cards WOn’t function properly, without plugging in the power supply.

Join the power supply to video card

Many video cards come packaged with adapters that may change your present connectors into ones that can fir to the video card.

9 Close your computer up.

As soon as you’ve verified the card was seated properly, secured, and been linked to the power supply, you can close up the case. Ensure that you plug in your display to the new video card. If you had been using onboard video before, the monitor was likely plugged into the motherboard. In order to take advantage of your brand-new card, your display should be joined to it.
For best results, use DisplayPort or HDMI and your video card to plug in your display. If card or your screen does not support DisplayPort or HDMI, the next best alternative is DVI, followed by VGA.

Testing and Installing Drivers

1 Power on your computer.

Your operating system will almost certainly find the new card and try to correct your screen such it is using the best resolution as well as color depth. Accept the changes and input the operating system.
You must troubleshoot your setup in case your monitor doesn’t show any picture in any way. Check to be sure you have the card connected and properly installed.
An unusual, jagged- appearing or distorted graphic might indicate an issue with your video card. Check that your card is correctly installed before contacting the manufacturer.

2 Add your driver disc or download the drivers. You can add it to start the driver set up process in case your video card came using a driver cd. In case your card did not come using a disc, or you would like to ensure you have the latest launch of the drivers potential, you may download the drivers directly from Nvidia or AMD (depending about what card you have). Look here for how to find and uodate drivers for Windows, Mac OS X or Linux.

3 Install the drivers.

The driver installation procedure is mainly automatic, in the event that you need to set up any additional video card management software, though you may get asked. This additional applications is optional, but might help ensure that your drivers stay up so far. Your screen reset and will probably flicker throughout the setup process.
Drivers comprised on a disk are nearly constantly by the time they are purchased, which means you’ll probably be asked to upgrade after installing them.

4 Start a match up.

Let us be honest: the reason you got this card is you can play the most recent and greatest games. So what better solution to test it out than to fire one up? Before starting to play, explore the Video settings menu of the game. Turn all the settings up as high as they are able to go and give the game a whirl. In case it performs smoothly then you are all set!

You should make an effort to keep it at the resolution of your monitor when establishing the resolution. Though newer screens have a native resolution that is higher than that, for most flatscreen computer screens, this is 1920x1080.

When the game is performing or choppy poorly, start lowering settings one by one. Don’t stress too much occasionally matches come out that do not function right with any card; if your card can’t handle the Ultra settings!
More than just the video card affects a game’s performance. Your processor, RAM, and also hard disk speed will play part in how the game performs.